Orion Unitized
Width: standard 72" (1829 mm)
Height: mast down 108" (2746 mm)mast up 141" (3581 mm)
Length: mast down 195" (4191 mm)mast up 236.5" (6007 mm)
Weight: 32,500 lbs (14,742 kg) approx.Speed: 3 kph
DESCRIPTION: The Orion is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure from the on board booster compressor.
PERFORMANCE: The Orion can be used to drill from 3.5 inch (89 mm) to 6.5 inch (165 mm) diameter holes to a depth greater than 330 ft (100 m).
WITH OPTIONS: It can also be used for drilling 8.5 inch (216 mm) holes and occasionally reaming up to 17.5 inch (445 mm) diameter holes with a 12 inch hammer and up to 30 inch (762 mm) diameter holes with a 12 inch hammer and up to 30 inch (762 mm) diameter holes with a
V-30 raise attachment. The range of drilling includes 360° ring in 105°of plane from horizontal to 15° past vertical.
GENERAL SPECIFICATIONS
- STANDARD UNIT DESCRIPTION
The Orion is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high pressure air. This drill is unitized with an on board reciprocating booster compressor. The Orion can be used to drill from 3 1/2 inch (89 mm) to 6 1/2 inch (165 mm) diameter holes to a depth greater than 330 ft. (100 m). With options, it can also be used for drilling 8.5 inch (216 mm) holes and occasionally reaming up to 17.5 inch (445 mm) diameter holes with a 12 inch hammer and up to 30 inch (762 mm) diameter holes with a V-30 raise attachment. - DRILL DEPTH
Over 330 ft. (100 m) - UNDERCARRIAGE
The Orion is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high pressure air. This drill is unitized with an on board reciprocating booster compressor. - FEED ASSEMBLY
Mast overall length 11' 9" (3581 mm) for 6 ft (1.8 m )pipe. Two stage telescopic feed cylinder. 15,800 lbs (70kN) hoisting. The Carousel has a 16 pipe capacity for 6 ft. (1.8 m) pipe with a diameter up to 4 inches (101 mm). - 6230 TOP DRIVE
Hydraulic driven with 4225 ft-lbs (5730 Nm) torque. Speed variable from 0 to 80 rpm, incorporated with Splined Piston breakout system. - BOOSTER
On-board, delivers up to 700 scfm (20 m©¯) of air at 350 psi (24 bar) when supplied mine air at 90 psi (6 bar). - WATER INJECTION
Injected with a triplex pump at 12 gpm (45 lpm) up to 700 psi (48 bar). - OIL INJECTION
Injected with an air driven pump at up to 6 gpm (22 lpm). - HYDRAULICS
Variable displacement, load sensing, pressure compensated pump producing 49 gpm (185 lpm) @ 3000 psi (207 bar). - CONTROLS
Electric/hydraulic operational controls are mounted on an wheeled remote stand that allows drilling from up to 50 feet away from the drill. - ELECTRIC
Components enclosed in CEMA 4 panel. Includes, 3 kva transformer, delta-wye starter, circuit breaker, on/off and reset buttons, phase loss/phase reversal protection, motor overload protection, voltmeter and ammeter, indicator lights. - POWER
Hydraulic drive - 50 Hp (37 kW), TEFC electric motor. Booster 75 Hp - PAINT
CAT Yellow - MANUALS
Two (2) sets: Operator, Parts and Maintenance.